Product introduction
作為柏康主打產品，U型雙管板式換熱器構造巧妙，通用性強；具有體積小、換熱效率高、、防交叉污染等優
點，確保符合FDA cGMP 、EU GMP 、SFDA GMP等相關質量標準。
產品廣泛應用在純化水（PW）系統巴氏消毒（25℃~80℃）、注射水（WFI）系統滅菌（80℃~121℃）、注射水
（WFI）的低溫冷卻（80℃~25℃）。
As the main product of Baikang, the U-shaped double-tube plate heat exchanger has a clever structure and strong versatility; it has the advantages of small volume, high heat exchange efficiency, no dead angle, anti-cross-contamination, etc., ensuring compliance with FDA cGMP, EU GMP, SFDA GMP, etc. Relevant quality standards.
Products are widely used in purified water (PW) system pasteurization (25 ° C ~ 80 ° C), injection water (WFI) system sterilization (80 ° C ~ 121 ° C), injection water (WFI) low temperature cooling (80 ° C ~ 25 °C).
產品特點
Product features
相對列管式空間占用較少
Compared with in line tube serial, it needs less space
的折流板設計對熱媒、冷媒起到了很好的分流作用，并提高了換熱效果
The Unique segment design to e fectively separate coolant and heat me dium.
管程部分全部采用316L材質不銹鋼，全排凈設計;與管板連接采用脹焊工藝，并設計防止交叉污染的導流漕,整體結構符合衛生要求，滿足FDA cGMP驗證要求
The tube em ploys 31 6L stainless steel; full drain des gn. The connection between tu be and tube sheets emplayexp anding-welding application. Meanwhile a flow guiding slot was designed to prevent cross-contamin ation.The whole structure meets the requirement of clean, fufill the standard of FDA and cGMP.
殼程、管程能實現分離，便于清潔污垢，保證持久的換熱效果
The tube bundie and shell can be sep arated to clean pollutions to guarantee effective heat exchanging fficiency.
完整的驗證文件，符合FDA cGMP要求
Full set of validation document; comply with the standard of FDA and cGMP.
采購中心
